|
Post by 4g63ownedu on Aug 2, 2005 19:30:03 GMT -5
My Ground control coilovers and KYB AGX's are finally in. As soon as I get my camber plates I will put this shit on. No more body roll!!! I went with 440lb spring rates in front/375lb in the rear, which is quite a bit more than standard coilovers. Should make for a stiff ride, but excellent handling. The camber plates are Ground control also, and are camber and caster adjustable. The AGX's are 8 way adjustable in the rear and 4 way in the front, once I get my sway bar I should be able to tackle corners much better.
|
|
|
Post by Töuge-MR on Aug 3, 2005 0:25:55 GMT -5
WOOHOOH!
|
|
|
Post by vroompsh on Aug 3, 2005 7:55:14 GMT -5
Nice nice....now you just have to take me for a ride at autox...yay!!!
|
|
|
Post by 4g63ownedu on Aug 3, 2005 17:03:58 GMT -5
I will, the cmaber plates are waiting to ship because they were out of stock of the hats. They ship either tomorrow or tuesday.
|
|
|
Post by gearhead559 on Aug 7, 2005 12:25:19 GMT -5
I can do a custom alignment for you when your done....
|
|
|
Post by 4g63ownedu on Aug 7, 2005 15:23:07 GMT -5
Sweet, my car will need it and I've never worked with adjustable camber plates before.
|
|
|
Post by 4g63ownedu on Aug 18, 2005 19:09:49 GMT -5
Camber plates are on their way finally, anyone have a place that I could install all this stuff? I don't have a place to install this stuff and may need some help with rusty bolts!
|
|
Ender
CSR Noob
DSM-erific
Posts: 8
|
Post by Ender on Aug 22, 2005 9:30:39 GMT -5
Bring it all with ya next week Ben.
|
|
|
Post by 4g63ownedu on Aug 22, 2005 17:00:11 GMT -5
I need to do it up here where I can go get an alignment right away, plus I'm not coming down for 2 weeks and the suspension will be going on this weekend.
Camber plates are in. Ill put up install pics and before and after of the ride height, best test will be at autox in Sep.
|
|
|
Post by toophatspitfire on Sept 3, 2005 15:04:49 GMT -5
anyone have a place that I could install all this stuff? I don't have a place to install this stuff and may need some help with rusty bolts! your welcome fellow ben...
|
|
|
Post by 4g63ownedu on Sept 5, 2005 13:51:12 GMT -5
Thanks for the help Ben. We put the new bump stops on sat. and they work fine, who would of thought that Jetta bump stops work perfectly! So It's all ready to go except the camber plates which I've decided to sell since I can't lower the car enough to need them.
|
|
|
Post by toophatspitfire on Sept 9, 2005 18:09:39 GMT -5
after all that waiting for them?
|
|
|
Post by 4g63ownedu on Sept 10, 2005 10:46:10 GMT -5
Yeah I know, it pisses me off. Well I can't lower the car anywhere enough to need them at all, so theyre for sale. The front suspension desigm on these cars is very short travel so lowering is minimal unless you want to ride the bumpstops all day. I'm gonna wait and see how the next autox goes and if i'm riding the bumpstops all day I'm going to seel the Laser.
|
|