|
|
Post by audioguy on Apr 1, 2005 21:08:30 GMT -5
Is there an easy way to take the speed limiter off of my camry or will that require me to by a hypertech tuner or something? I am looking for a low cost easy fix any suggestions?
|
|
|
|
Post by 4g63ownedu on Apr 1, 2005 23:34:16 GMT -5
Every ecu is different. I've heard of some you can make a simple sauder to the board of the ecu. Your best and safest bet is a proven chip. Most of these chips usually add a few ponies as well by modifying the fuel curve, and some may not. Bite your tongue and get the chip.
|
|
|
|
Post by Töuge-MR on Apr 2, 2005 14:09:24 GMT -5
And they're normally not cheap..
|
|
|
|
Post by 4g63ownedu on Apr 2, 2005 17:01:36 GMT -5
I know for some cars they make a dedicated chip that only removes the speed governer, but aftermarket is not as good for the Camry. Try to find out if the ecu takes it's speed readings from the speedo cable, if it does just disconnect the speedo cable. Bad part is your speedometer won't work and it's obviously illegal.
|
|
|
|
Post by audioguy on Apr 3, 2005 15:32:48 GMT -5
your crazy ben. anyways i guess i will probably just get the chip. Would online or autozone be better?
|
|
|
|
Post by 4g63ownedu on Apr 3, 2005 15:49:45 GMT -5
Hard to say, I didn't think Autozone would carry anything like that. Be careful on Ebay. I see lots of chips for real cheap, but they probably would only cause problems. Buy a chip from a reputable company like "Jet Chip", the price will reflect the quality. Expect to pay $100-$500 for a decent chip.
|
|
|
|
Post by audioguy on Apr 3, 2005 19:58:31 GMT -5
Ok. it's the whole money issue first though. I will hopefully have it by summer though. Thanks for the advice.
|
|
SupaSupraSE
CSR Regular Member
NASolution.com Moderator
www.NAsolution.com
Posts: 59
|
Post by SupaSupraSE on Apr 5, 2005 14:56:46 GMT -5
Check some online forums and find out whats the most cost/labor effective way of removing your governor.
|
|
